Grinding surface: remove laitance and prepare a levelled concrete floor free from contaminants (grease, oil etc.). Touch up (minor repairs) through ADVAPUTTY in order to seal superficial cracks/holes.
Application to seal the surface. Priming is not normally required provided the substrate is sound, untreated and good quality nonporous concrete. If any doubts exist of the quality of the concrete, or if it is porous it should be primed with ADVAPOXY PRIMER.
Coating application of ADVAPOXY 1500 (Solvent free, 100% solids, heavy duty epoxy floor coating). It is a two-component system resin hardener mixed with heavy duty low speed mixing drill.
Application of AdvaAntislip grains: slip resistance, covers irregularities, better abrasion resistance
Final coat (Topcoat) of ADVAPOXY 1500
Lining and numbering for car parks can be doneafter 24H
Car park floorings are meant to withstand a significant amount of automotive oils, heavy vehicles, water ingress etc.
Floor coating systems for car parks meet high demands depending if the car park is indoor or exposed and are subject to many different stresses, including atmospheric conditions.
For indoor car parks, AIM Industries uses a solvent free, epoxy resin floor coating: Advapoxy 1500.
While for an outdoor car park, AIM Industries uses polyurethane coating.
1. Surface preparation:
- Grinding surface: remove laitance and prepare a levelled concrete floor free from contaminants (grease, oil etc.)
- Touch up (minor repairs) through ADVAPUTTY in order to seal superficial cracks/holes.
2. Advapoxy Primer
application to seal the surface. Priming is not normally required provided the substrate is sound, untreated and good quality nonporous concrete. If any doubts exist of the quality of the concrete, or if it is porous it should be primed with ADVAPOXY PRIMER.
3. Coating application of ADVAPOXY 1500
(Solvent free, 100% solids, heavy duty epoxy floor coating). It is a two-component system resin hardener mixed with heavy duty low speed mixing drill.
4. Application of AdvaAntislip grains: slip resistance, covers irregularities, better abrasion resistance
5. Final coat (Topcoat) of ADVAPOXY 1500
6. Lining and numbering for car parks can be doneafter 24H
SOLVENT FREE, EPOXY RESIN FLOOR COATING
ADVAPOXY 1500 is epoxy solvent free high build pigmented epoxy protective coating for concrete floors. The fully cured film has good abrasion and impact resistance, good adhesion to concrete floors and good resistance to water, mild chemicals and solvents.
The total dry film thickness of the coating shall be a minimum of 400 microns and shall have a compressive strength of 70 N/ mm2, flexural strength of 40 N/mm2 and tensile strength of 20 N/mm2. The floor shall be prepared and the coating mixed and applied in accordance with the manufacturer's current data sheet.